hydraulic brick press
The Automatic Hydraulic Brick Press Machine(HT1000) features compact size, streamlined components, smooth operation, high pressure, short cycles and strong intelligence. Adjusting mold, pressing parameters, sensor position, pressing time and press times enables it to produce standard bricks and hollow blocks, being the preferred equipment for fly ash bricks, fly ash sand bricks and concrete bricks. Tested with high pressure, high speed and low noise, it meets national environmental requirements, serving as ideal for large-scale eco-friendly brick enterprises.
After strict multi-cycle, multi-condition testing, the Automatic Hydraulic Brick Press Machine(HT1000) delivers exceptional performance in pressure, speed and noise control. It offers stable high pressure (rated 31.5 MPa) to fully compact eco-brick raw materials, enhancing finished product density and strength while minimizing cracking. With optimized transmission and intelligent control, it achieves a production speed of 11000-13500 standard eco-bricks per hour—40% faster than traditional models—meeting large enterprises’ continuous production demands to reduce cycles and increase efficiency. Featuring multi-layer noise reduction and third-party environmental verification, it is perfect for large-scale eco-brick enterprises aiming for green production.
Performance parameters：
| Working Pressure (KN) | 10000 |
| Pressing Quantity (pieces, standard bricks) | 45 |
| Pressing Cycle (seconds) | 15-20 |
| Pressing Property | Bidirectional Pressing |
| System Maximum Pressure (Mpa) | 31.5 |
| Mold Opening (mm) | 1340X1120 |
| Fly Ash Proportion (%) | 70 |
| Annual Production Capacity (pieces, standard bricks) | 60,000,000 |
| Annual Fly Ash Consumption (tons) | 110,000-120,000 |
| Total Installed Power (KW) | 105.4 |
| Weight (t) | 40 |
| Exhaust Times | More than 3 times (automatically adjustable) |
| Maximum Filling Depth (mm) | 360 |
Production parameter：
| Standard brick：240*115*53mm | |
| Quantity of each molding：48 Molding cycle：16-20S Production capacity：8600--10800/H |  |
| Cellular brick：240*115*90mm | |
| Quantity of each molding：24 Molding cycle：16--20S Production capacity：4300--5400/H |  |
| hollow brick：390*190*190mm | |
| Quantity of each molding：10 Molding cycle：16--20S Production capacity：1800--2200/H |  |
Product Details
 | This equipment employs a three-beam, four-column core structure, exhibiting exceptional rigidity and stability under high pressure, ensuring reliable operation. |
Top Oil Storage Bag Design: An oil storage bag is installed on the top of the large oil cylinder. Only a small flow of high-pressure oil provided by the hydraulic system is needed to meet the working requirements. This design has low energy consumption, which can directly reduce production costs; at the same time, it can prevent the hydraulic oil in the oil cylinder from heating up, effectively prolonging the service life of the oil cylinder. |  |
 | 360°Rotating Material Distribution System: Equipped with a material distribution box conveying device, it realizes 360° dead-angle-free rotating material distribution, making the material distribution more uniform and faster, and ensuring the consistency of brick billet forming. |
Bionic Crank Arm Type Double-Cylinder Material Distribution: Adopts a bionic crank arm structure combined with double-cylinder drive. It not only improves the material distribution speed, but also enhances the operation stability of the material cart, and greatly reduces the equipment failure rate. |  |
 | Adjustable Track Wheels for Material Distribution Box: The track wheels support fine adjustment, which can optimize the operation stability of the material distribution box, accurately control the operation gap, and fundamentally avoid the problem of material scattering. |
It innovatively incorporates floating mold frame technology, precisely simulating bidirectional pressing effects to guarantee uniform density of the brick blank throughout the entire area, thereby achieving superior molding quality. |  |
 | Dual-Pump Intelligent Hydraulic System: Adopts a dual-pump parallel working mode, which can automatically adjust the oil supply method according to the actual working conditions. It outputs large flow during rapid movement and provides high pressure under high load. It not only improves the system response speed and work efficiency, but also reduces energy consumption, adapting to diversified production needs. |
Equipment Production Site:
Product Application Fields
Founded in 2004 and based in Gaotang, Shandong, Shandong Huatong Hydraulic Machinery Co., Ltd. is a technology enterprise specializing in designing, developing, and manufacturing comprehensive utilization equipment for bulk industrial solid waste. Our product range includes intelligent production lines for automatic block forming machines, automatic static pressure forming systems, high-precision assembled gypsum blocks, aerated concrete blocks, and vertical shaft planetary mixing stations. We also provide customized waste solutions and operational services. Supported by subsidiaries including Huatong Machinery, Avante Machinery, Darun Environmental Protection, and Cote d'Ivoire Shandong Group Company, we employ over 270 skilled engineers and technicians dedicated to delivering innovative and sustainable industrial equipment.
International clients visited our company for on-site inspections and engaged in in-depth discussions regarding product cooperation and quality details. We highly value every communication with our global partners and are committed to providing reliable products and professional services.
The following are some of the honors, qualifications, and certifications our company has received, which demonstrate our commitment to quality and professionalism.
FAQ
1. What strength do static pressure bricks have?
Compressive strength ranges from 10-30 MPa, exceeding standards for residential and commercial construction.
2. Are they weather-resistant?
Yes, dense structure reduces water absorption, making them suitable for humid or rainy climates without cracking.
3. Can they be used for load-bearing walls?
Absolutely, their high strength qualifies them for load-bearing applications, unlike some vibration-made bricks.
4. Do they require curing?
Concrete-based bricks need 7-14 days of moist curing; no firing is needed, saving energy compared to clay bricks.
