Hydraulic Brick Machine
The HT1300 Double-sided static hydraulic brick machine features a compact structure, optimized component layout, stable operation, high pressing pressure, short production cycle and excellent intelligent performance. It supports the production of both standard bricks and hollow blocks by means of adjusting molds, pressing parameters, sensor positions, pressing duration and pressing times.
This equipment is the top choice for manufacturing fly ash bricks, fly ash sand bricks and concrete bricks. Through professional testing, it has been verified to possess outstanding advantages such as high pressure, high working efficiency and low noise. Conforming to national environmental protection standards, it serves as an ideal production equipment for large-scale environmental-friendly brick manufacturing enterprises.
Rigorously tested through multiple cycles and conditions, the HT1300 Hydraulic Brick Machine excels in pressure, speed and noise management. With a stable rated pressure of 31.5 MPa, it fully compacts eco-brick raw materials, improving finished product density and strength while reducing cracking. Its optimized transmission and intelligent control achieve a production speed of 11000-13500 standard eco-bricks/hour—40% quicker than traditional models—catering to large enterprises’ continuous production demands for shorter cycles and higher efficiency. Featuring multi-layer noise reduction and passing third-party environmental assessments, it is an ideal choice for large-scale eco-brick manufacturers aiming for green production.
Performance parameters：
Working Pressure (KN) | 13000 |
Pressing Quantity (pieces, standard bricks) | 60 |
Pressing Cycle (seconds) | 15-20 |
Pressing Property | Bidirectional Pressing |
System Maximum Pressure (Mpa) | 31.5 |
Mold Opening (mm) | 1660X1180 |
Fly Ash Proportion (%) | 70 |
Annual Production Capacity (pieces, standard bricks) | 85,000,000 |
Annual Fly Ash Consumption (tons) | 150,000-170,000 |
Total Installed Power (KW) | 129.2 |
Weight (t) | 52 |
Exhaust Times | More than 3 times (automatically adjustable) |
Maximum Filling Depth (mm) | 36 0 |
Production parameter：
| Standard brick：240*115*53mm | |
| Quantity of each molding：60 Molding cycle：16-20S Production capacity：11000--13500/H |  |
| Cellular brick：240*115*90mm | |
| Quantity of each molding：30 Molding cycle：16--20S Production capacity：5400--6800/H |  |
| hollow brick：390*190*190mm | |
| Quantity of each molding：12 Molding cycle：16--20S Production capacity：2200--2700/H |  |
Equipment Production Site:
Product Application Fields
Product Details
 | This equipment employs a three-beam, four-column core structure, exhibiting exceptional rigidity and stability under high pressure, ensuring reliable operation. |
| Top Oil Storage Bag Design: An oil storage bag is installed on the top of the large oil cylinder. Only a small flow of high-pressure oil provided by the hydraulic system is needed to meet the working requirements. This design has low energy consumption, which can directly reduce production costs; at the same time, it can prevent the hydraulic oil in the oil cylinder from heating up, effectively prolonging the service life of the oil cylinder. |  |
 | 360°Rotating Material Distribution System: Equipped with a material distribution box conveying device, it realizes 360° dead-angle-free rotating material distribution, making the material distribution more uniform and faster, and ensuring the consistency of brick billet forming. |
| Bionic Crank Arm Type Double-Cylinder Material Distribution: Adopts a bionic crank arm structure combined with double-cylinder drive. It not only improves the material distribution speed, but also enhances the operation stability of the material cart, and greatly reduces the equipment failure rate. |  |
 | It innovatively incorporates floating mold frame technology, precisely simulating bidirectional pressing effects to guarantee uniform density of the brick blank throughout the entire area, thereby achieving superior molding quality. |
| Adjustable Track Wheels for Material Distribution Box: The track wheels support fine adjustment, which can optimize the operation stability of the material distribution box, accurately control the operation gap, and fundamentally avoid the problem of material scattering. |  |
 | Dual-Pump Intelligent Hydraulic System: Adopts a dual-pump parallel working mode, which can automatically adjust the oil supply method according to the actual working conditions. It outputs large flow during rapid movement and provides high pressure under high load. It not only improves the system response speed and work efficiency, but also reduces energy consumption, adapting to diversified production needs. |
Founded in 2004 and based in Gaotang, Shandong, Shandong Huatong Hydraulic Machinery Co., Ltd. is a technology enterprise specializing in designing, developing, and manufacturing comprehensive utilization equipment for bulk industrial solid waste. Our product range includes intelligent production lines for automatic block forming machines, automatic static pressure forming systems, high-precision assembled gypsum blocks, aerated concrete blocks, and vertical shaft planetary mixing stations. We also provide customized waste solutions and operational services. Supported by subsidiaries including Huatong Machinery, Avante Machinery, Darun Environmental Protection, and Cote d'Ivoire Shandong Group Company, we employ over 270 skilled engineers and technicians dedicated to delivering innovative and sustainable industrial equipment.
International clients visited our company for on-site inspections and engaged in in-depth discussions regarding product cooperation and quality details. We highly value every communication with our global partners and are committed to providing reliable products and professional services.
The following are some of the honors, qualifications, and certifications our company has received, which demonstrate our commitment to quality and professionalism.
FAQ
1. How easy is it to operate a static pressure brick machine?
User-friendly with intuitive controls; trained operators can master it in days, with automated models requiring minimal manual input.
2. What’s the typical production cycle?
A full cycle (feeding, pressing, ejecting) takes 10-30 seconds, depending on brick size, with consistent output for batch production.
3. Does it need constant supervision?
Semi-automatic models need monitoring, while fully automatic ones run unattended, with sensors alerting to issues like material shortages.
4. Can it switch between brick sizes quickly?
Yes, with interchangeable molds; changing molds takes 20-30 minutes, allowing flexible production of various sizes.
