Hydraulic Block Making Machine
The HT1300 fully automatic hydraulic brick press , streamlined components, smooth operation, high pressure, short cycle times, and a high level of intelligence. By adjusting the mold, pressing parameters, sensor position, pressing time, and number of presses, it can produce both standard bricks and hollow blocks. It is the preferred equipment for producing fly ash bricks, fly ash sand bricks, and concrete bricks. After testing, the machine has high pressure, high speed and low noise, meets the national environmental protection requirements, and is an ideal equipment for large-scale environmentally friendly brick production enterprises.
After rigorous multi-cycle and multi-condition testing, HT1300 Model Automatic Hydraulic Press Brick Machine excels in pressure, speed, and noise control. It delivers stable high pressure (rated 31.5 MPa), ensuring full compaction of eco-brick raw materials to boost finished product density and strength while reducing cracking.
Its optimized transmission and intelligent control enable a high production speed of 11000-13500 pieces/hour for standard eco-bricks—40% faster than traditional models—meeting large enterprises’ continuous production needs to cut cycles and raise efficiency.
HT1300 Model Automatic Hydraulic Press Brick Machine With multi-layer noise reduction. It has passed third-party eco-testing, making it ideal for large-scale eco-brick enterprises to achieve green production.
Performance parameters：
| Working Pressure (KN) | 13000 |
| Pressing Quantity (pieces, standard bricks) | 60 |
| Pressing Cycle (seconds) | 15-20 |
| Pressing Property | Bidirectional Pressing |
| System Maximum Pressure (Mpa) | 31.5 |
| Mold Opening (mm) | 1660X1180 |
| Fly Ash Proportion (%) | 70 |
| Annual Production Capacity (pieces, standard bricks) | 85,000,000 |
| Annual Fly Ash Consumption (tons) | 150,000-170,000 |
| Total Installed Power (KW) | 129.2 |
| Weight (t) | 52 |
| Exhaust Times | More than 3 times (automatically adjustable) |
| Maximum Filling Depth (mm) | 360 |
Production parameter：
| Standard brick：240*115*53mm | |
| Quantity of each molding：60 Molding cycle：16-20S Production capacity：11000--13500/H |  |
| Cellular brick：240*115*90mm | |
| Quantity of each molding：30 Molding cycle：16--20S Production capacity：5400--6800/H |  |
| hollow brick：390*190*190mm | |
| Quantity of each molding：12 Molding cycle：16--20S Production capacity：2200--2700/H |  |
Equipment Production Site
Product Details
 | This equipment employs a three-beam, four-column core structure, exhibiting exceptional rigidity and stability under high pressure, ensuring reliable operation. |
Top Oil Storage Bag Design: An oil storage bag is installed on the top of the large oil cylinder. Only a small flow of high-pressure oil provided by the hydraulic system is needed to meet the working requirements. This design has low energy consumption, which can directly reduce production costs; at the same time, it can prevent the hydraulic oil in the oil cylinder from heating up, effectively prolonging the service life of the oil cylinder. |  |
 | 360°Rotating Material Distribution System: Equipped with a material distribution box conveying device, it realizes 360° dead-angle-free rotating material distribution, making the material distribution more uniform and faster, and ensuring the consistency of brick billet forming. |
Bionic Crank Arm Type Double-Cylinder Material Distribution: Adopts a bionic crank arm structure combined with double-cylinder drive. It not only improves the material distribution speed, but also enhances the operation stability of the material cart, and greatly reduces the equipment failure rate. |  |
 | It innovatively incorporates floating mold frame technology, precisely simulating bidirectional pressing effects to guarantee uniform density of the brick blank throughout the entire area, thereby achieving superior molding quality. |
| Adjustable Track Wheels for Material Distribution Box: The track wheels support fine adjustment, which can optimize the operation stability of the material distribution box, accurately control the operation gap, and fundamentally avoid the problem of material scattering. |
|
 | Dual-Pump Intelligent Hydraulic System: Adopts a dual-pump parallel working mode, which can automatically adjust the oil supply method according to the actual working conditions. It outputs large flow during rapid movement and provides high pressure under high load. It not only improves the system response speed and work efficiency, but also reduces energy consumption, adapting to diversified production needs. |
Product Application Fields
Founded in 2004 and based in Gaotang, Shandong, Shandong Huatong Hydraulic Machinery Co., Ltd. is a technology enterprise specializing in designing, developing, and manufacturing comprehensive utilization equipment for bulk industrial solid waste. Our product range includes intelligent production lines for automatic block forming machines, automatic static pressure forming systems, high-precision assembled gypsum blocks, aerated concrete blocks, and vertical shaft planetary mixing stations. We also provide customized waste solutions and operational services. Supported by subsidiaries including Huatong Machinery, Avante Machinery, Darun Environmental Protection, and Cote d'Ivoire Shandong Group Company, we employ over 270 skilled engineers and technicians dedicated to delivering innovative and sustainable industrial equipment.
International clients visited our company for on-site inspections and engaged in in-depth discussions regarding product cooperation and quality details. We highly value every communication with our global partners and are committed to providing reliable products and professional services.
The following are some of the honors, qualifications, and certifications our company has received, which demonstrate our commitment to quality and professionalism.
FAQ
1. who are we?
We are based in Shandong, China, start from 2004. There are total about 201-300 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Block Machine,brick machine,block making machine,brick making machine,concrete block machine
4. why should you buy from us not from other suppliers?
Huatong is focus on manuacturering concrete block brick making machine, concrete mixer since 1986.Our mould has heat treatment, carbonrization to improve quality.,we are professional for the fully Automatic block making machine with our own aboard company
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency: USD,EUR,CNY;
Accepted Payment Type: T/T,L/C；
Language Spoken: English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian.
